What think about Recreational Marijuana, society perspective, and policies?
September 18, 2019
Doi Or Retrieval URL
September 18, 2019


Report Issue

Examination Lesson 1, Pages 47 – 53 Questions 1 – 20

Lesson 1: Materials, Labor, and Factory Overhead


Questions 1–20: Select the one best answer to each question.


1.   The form that serves as an authorization to withdraw materials from stock is known as the


A.    stores requisition.


B.    purchase order.


C.   purchase requisition.


D.   returned materials report.


2.   Marlene works in a garment factory where she sews side seams in dresses and skirts. She receives no hourly wage. Rather, she’s paid a fixed rate for each seam she sews. The wage plan used by Marlene’s factory is called a _______ plan.


  A. modified wage C. make-up guarantee
  B. piece-rate D. hourly-rate








3.   When should process costing techniques be used in assigning costs to products?


A.    In situations in which standard costing techniques should not be used


B.    When production is only partially completed during the accounting period


C.    When a company has a regular production of similar products


D.    If the product is manufactured on the basis of each order received


4.   Overapplied overhead always results when a predetermined overhead rate is employed and when


A.    overhead incurred is more than overhead applied.


B.    overhead incurred is less than overhead applied.


C.    production is greater than sales.


D.    production is less than sales.


5.   An employee regularly earns $10 an hour for an 8-hour day with time-and-a-half for overtime hours. Assuming that the employee works a 10-hour day, the total overtime premium is


A. $5. C. $15.
B. $10. D. $30.


6.   Rowe Co.’s Job 401 for the manufacture of 2,200 coats was completed during August at the unit costs presented below. Final inspection of Job 401 disclosed 200 units that were sold to a jobber for $6,000.


Direct materials $24
Direct labor 18
Factory overhead      
(includes an allowance of $2 for spoiled work)   16


Assume that spoilage loss is charged to all production during August. What would be the unit cost of the good coats produced on Job 401?


A. $56.00 C. $60.80
B. $58.00 D. $63.80


7.   Which one of the following costs is considered a prime cost?


A.    Wages paid to production workers


B.    Wages paid to supervisory workers


C.   Amount paid for insurance


D.   Amount paid for rent











8.   The Lucas Manufacturing Company has two production departments (fabrication and assembly) and three service departments (general factory administration, factory mainte-nance, and factory cafeteria). A summary of costs and other data for each department, prior to allocation of service department costs for the year ended June 30, appears below.


The costs of the general factory administration department, factory maintenance depart-ment, and factory cafeteria are allocated on the basis of direct labor hours, square footage occupied, and number of employees, respectively.


        Factory Factory Factory  
    F abrication Assembly Administration Maintenance Cafeteria  
  D irect labor costs $ 1,950,000 $2,050,000        
  D irect material costs $ 3,130,000 $950,000        
  F actory overhead costs $ 1,650,000 $ 1,850,000 $ 80,000 $ 67,500 $58,000  
  D irect labor hours 237,690 —387,810        
  Number of employees 1 60 1 28 2 0 4 2 25  
  S quare footage occupied 2 0,000 3 0,000 2 ,400 2 ,000 4,800  


Assuming that Lucas elects to distribute service department costs to production departments using the direct distribution method, calculate the amount of factory maintenance department costs that would be allocated to the fabrication department. (Round all final calculations to the nearest dollar.)


A. $14,674 C. $22,804
B. $15,000 D. $27,000


9.   If the amount of overtime premium is to be charged to all jobs worked on during the period, the debit will be to the _______ account.


A. Factory Overhead C. Work in Process
B. Payroll D. Accrued Payroll


10. Of the following industries, which one would most likely use process costing?


A. Canned soup C. Printing
B. Home construction D. Shipbuilding
















Questions 11 and 12 are based on the following information.


The Bisset Corporation uses Raw Material A in a manufacturing process. The balances on hand, purchases, and requisitions of Raw Material A are given in the following table.



Raw Material A                
  Qu antities       Dollars    
D ate R eceived Is sued Balance   P rice R eceived Is sued Balance  
1 /1     1 00 $ 1.40     $140  
1 /24 3 00   4 00 1 .55 $465.00      
2 /8   8 0 320            
3 /16   1 40 180            
6 /11 1 50   3 30 1 .62 243.00      
8 /18   1 30 200            
9 /6   11 0 90            
1 0/15 1 50   2 40 1 .70 255.00      
1 2/29   1 40 100            


11.   If Bisset maintains a perpetual inventory record of Raw Material A on a FIFO basis, what will be the year-end inventory?


A. $152 C. $162
B. $159 D. $170


12.   Assume that no perpetual inventory is maintained for Raw Material A and that quantities are obtained by an annual physical count. The accounting records show information as to purchases but not as to issues. On this assumption, the closing inventory on a LIFO basis will be


A. $140. C. $156.
B. $152. D. $160.

















13.   Selected data concerning the past fiscal year’s operations of the Stanley Manufacturing Company are presented below (000s omitted):


    B eginning     Ending
Ra w materials $ 90     $85
Wo rk in process 3 0     65
F inished goods 1 00     90
Other data:        
Raw materials used       395
Total manufacturing costs charged to        
production during the year (includes raw  
ma terials, direct labor, and factory overhead) 680
Cost of goods available for sale       745
Labor and overhead expenses       285


Based on this information, the cost of raw materials purchased during the year amounted to


A. $385. C. $400.
B. $390. D. $430.



Use the following information to answer questions 14 and 15.



Carlos Company reported the following data for a six-month period:


Month Maintenance Cost for the Month Units Produced
January $3,500 400
February 3,000 300
March 3,750 500
April 3,400 350
May 2,500 200
June 3,800 450


Plot this information onto the graph in Examination Figure 1, and then answer questions 14 and 15.

















































14. What is the estimate of the fixed cost portion of the semivariable cost?


A. $1,000 C. $2,000
B. $1,500 D. $2,500


15. What is the variable cost per unit at a volume level of 400?


A. $2.00 C. $5.00
B. $3.75 D. $8.75


16.   The Eleanor Company payroll for the first week in January was $12,000. The amount of income tax withheld was 12 percent and the FICA, state unemployment, and federal un-


employment taxes were 8 percent, 5 percent, and 1 percent, respectively. The amount of the employer’s payroll taxes are


A. $720. C. $1,680.
B. $1,440. D. $3,120.


17.   When using a flexible budget, what will occur to fixed costs (on a per-unit basis) as pro-duction increases?


A.   Fixed costs per unit will increase.


B.   Fixed costs aren’t considered in flexible budgeting.


C.   Fixed costs per unit will remain unchanged.


D.   Fixed costs per unit will decrease.



18.   How should a shipment of completed goods to the customer be debited and credited?


A.    Debited to Finished Goods and credited to Cost of Goods Sold


B.    Debited to Cost of Goods Sold and credited to Finished Goods


C.   Debited to Accounts Payable and credited to Cash


D.   Debited to Cash and credited to Accounts Payable


19.   An accrued expense, such as accrued wages, is an amount that’s


A.    paid and not currently matched with earnings.


B.    not paid and not currently matched with earnings.


C.   not paid and currently matched with earnings.


D.   paid and currently matched with earnings.


20.   Inventory levels for firms using JIT inventory systems will be


A.    higher both for work in process and finished goods.


B.    higher for work in process and finished goods but lower for raw materials.


C.   lower for raw materials, work in process, and finished goods.


D.   higher for finished goods but lower for raw materials and work in process.



“Is this question part of your assignment? We Can Help!”

Labor was first posted on September 18, 2019 at 1:40 pm.
©2019 "Nursing Term Paper". Use of this feed is for personal non-commercial use only. If you are not reading this article in your feed reader, then the site is guilty of copyright infringement. Please contact me at ukbestwriting@gmail.com


“Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!”

Labor was first posted on September 18, 2019 at 1:41 pm.
©2019 "nursing Writers". Use of this feed is for personal non-commercial use only. If you are not reading this article in your feed reader, then the site is guilty of copyright infringement. Please contact me at admin@nursingtermpaper.org


"Is this question part of your assignment? We Can Help!"

Nursing Coursework